Back to Blog
How-to Guides 2026-11-20 District Camera 0 views

How to Attach a Godox Boom Arm with Clamp

How to Attach a Godox Boom Arm with Clamp

Learn how to attach a Godox LSA-15 boom arm with clamp to a light stand for studio lighting. Step-by-step setup guide with practical tips.

What the Godox LSA-15 Boom Arm with Clamp Does

The Godox LSA-15 is a boom arm with a built-in clamp, designed to mount onto a light stand and extend a light modifier or accessory over your subject. It's listed under Light Modifiers at District Camera with the tags Mounting & Clamps, and the brand is Godox. The standard SKU is 6952344218372.

This tool is useful for overhead lighting, portrait setups, or any situation where you need to position a light source away from the stand's center column. The clamp allows you to attach it directly to a light stand without requiring additional adapters.

Attaching the Godox LSA-15 to a Light Stand

Before you begin, make sure your light stand is stable and on a level surface. The LSA-15 attaches via its built-in clamp, which fits around the stand's center column.

  1. Open the clamp: Turn the clamp's tightening knob counterclockwise to open the jaws wide enough to fit around your light stand's center column. The clamp is designed to fit standard light stand diameters.
  2. Position the boom arm: Slide the clamp onto the stand at your desired height. The boom arm should extend horizontally over your shooting area. Tighten the knob clockwise by hand until the clamp is secure. Do not overtighten.
  3. Attach your light or modifier: The end of the boom arm has a standard 5/8" stud (with a 1/4"-20 thread) to mount a light fixture, softbox, or umbrella. Screw your accessory onto the stud and tighten the locking screw.
  4. Balance the load: If your light is heavy, slide the boom arm forward or backward through the clamp to shift the center of gravity. Some boom arms have a counterweight slot; the LSA-15's design relies on the clamp's grip and the stand's stability.
  5. Secure with a safety cable (recommended): Although not included with the LSA-15, attaching a safety cable between your light and the stand adds protection against accidental drops.

What the Catalog Confirms About the LSA-15

  • Godox LSA-15 Boom Arm with Clamp: The Godox LSA-15 is a boom arm with clamp, offered by District Camera as part of our lighting support and mounting accessories. It is listed under Light Modifiers with the tags Mounting & Clamps. This confirms the LSA-15 is a complete unit—no separate clamp or adapter needed—and is designed for mounting on light stands.
    Godox LSA-15 Boom Arm with Clamp
    Godox LSA-15 Boom Arm with Clamp
  • Godox LSA-15 Boom Arm with Clamp: SKU: 6952344218372 (Standard). The standard variant is the only option currently available, so you don't need to choose between different sizes or configurations.

What the Supplied Information Does Not Settle

The catalog does not specify the maximum load capacity of the LSA-15, the exact diameter range of the clamp, or detailed instructions for counterweighting. For heavy modifiers, consider using a counterweight bag on the boom arm's rear end (sold separately) and always test the setup before a shoot.

Also, the LSA-15 is designed for static studio use—not for fast-paced event or outdoor setups where the stand might be moved frequently. If you need a more portable solution, a lightweight boom arm or a different mounting system may be better.

Related Articles

Customer Service
Home
Products
Cart
Profile