Lowepro GearUp Pro II 8L Camera Cube Setup

Quick answer

Set up the Lowepro GearUp Pro II 8L Camera Cube by adjusting the internal dividers to fit your gear, then pack it into any compatible bag for a modular, protective carry solution.

Step-by-step setup guide

1. 1. Unfold and inspect the cube: Open the cube fully and check that all zippers run smoothly. The cube has a padded interior and a top handle for easy carrying. Lay it flat on a clean surface. Common mistake: forgetting to check zipper alignment before loading gear can cause snags later.
2. 2. Arrange the main divider for your camera body: Identify the largest padded divider. Position it to create a compartment wide enough for your camera with the attached lens. For a body with a portrait grip and a 70-200mm f/2.8, leave about 1-2 inches of extra space so the lens hood (if reversed) fits without pressure. Checkpoint: ensure the divider's hook-and-loop strip is fully pressed against the cube wall so it doesn't collapse when you insert the camera.
3. 3. Place the camera body lens-down: Insert the camera with the lens pointing downward into the main compartment. This protects the lens mount and keeps the grip accessible. The cube's depth should allow the viewfinder or top plate to sit below the top edge. Common mistake: placing the camera lens-up can put weight on the eyecup or flash hotshoe, risking damage.
4. 4. Add side dividers for extra lenses: Use the remaining smaller dividers to create two side compartments—one on each side of the main camera compartment. Each compartment should fit one additional lens (e.g., a 24-70mm or a prime). Press dividers firmly against the cube walls. Checkpoint: if a lens wobbles, add a small cloth or lens pouch to fill the gap; overtightening can compress the padding and reduce protection.
5. 5. Secure accessories in the top flap: The cube's top flap has a mesh pocket and a zippered compartment. Store memory cards, batteries, and a lens cloth here. Avoid placing heavy items (like a power bank) in the flap, as they can press down on the gear below. Common mistake: overloading the top flap can cause the cube to bulge and make it hard to close your outer bag.
6. 6. Close the cube and test fit in your bag: Zip the cube completely. Lift it by the handle and place it into your backpack, duffel, or travel bag. The 8L size fits most 30-40 liter bags. If the cube shifts, use your bag's internal compression straps to hold it in place. Checkpoint: if the cube doesn't fit, remove the dividers and try a different orientation (rotate 90 degrees) before giving up on the bag.

Product facts

• Lowepro GearUp Pro II 8L Camera Cube (X-Large): The Lowepro GearUp Pro II 8L Camera Cube (X-Large) is designed to organize and safeguard a full-frame mirrorless or DSLR with a portrait grip and an attached lens up to 70-200mm f/2.8 plus two additional lenses and/or accessories. This means you can leave your camera ready to shoot with the telephoto zoom attached, reducing setup time while keeping the gear protected inside the cube.