Lowepro Lens Case 13 x 32cm: Which Lenses Actually Fit
By District Camera | Published: 2026-11-02
Category: Buying Guides
Use the 13 x 32cm interior as a hard size limit, not a guess. See which telephoto lenses fit, when to size up, and how the padding and zipper protect your gear.
Quick answer
The Lowepro Lens Case 13 x 32cm fits lenses that measure no more than about 13cm across and 32cm long, including the hood and mount. Treat those numbers as a hard limit: if your lens is longer than 32cm with the hood reversed, or wider than 13cm at the barrel, choose a larger case instead.
Why the 13 x 32cm interior is the only number that matters
Lowepro lists this case by its interior dimensions, not by a lens model list. That means the fit depends on your lens as configured, not on the camera brand or mount. A 70-200mm f/2.8 and a 100-400mm can both be called telephoto zooms, yet one may slide in while the other stops at the zipper.
Measure with the hood reversed and the rear cap on, because that is how the lens will sit in the case. If the lens has a tripod collar, decide whether you will remove it or leave it on; a collar adds width that counts against the 13cm limit. The case has no supplied option types, so there is no alternate insert or extension to change the fit.
Where the padding helps and where it costs you space
The case uses thick, one-piece foam padding, which is the reason to choose it for fragile glass and mounts. The same foam reduces the usable opening slightly, so a lens that measures exactly 13cm across may feel tight. If your lens is close to the limit, plan for a little clearance rather than forcing it.
The OverLap Zipper construction shields the lens from dust and moisture, but it also means you should not overstuff the case. A case that closes with effort puts pressure on the zipper and on the lens. If the lid will not close cleanly with the hood reversed, the case is too small.
When a 13 x 32cm case is the wrong choice
This case is sized for one lens, not for a lens plus a teleconverter or a second small lens. If you routinely carry a converter attached, measure the combined length and compare it with 32cm. If the combination exceeds that, you need a longer case or a different carrying solution.
Also skip this size if you want to store the lens with the hood in the shooting position. A large petal or cylindrical hood can add several centimeters of length, and that extra length is the most common reason a lens that fits without the hood will not fit with it.
Decision rules for buying the 13 x 32cm case
- Measure before you buy: Put the rear cap on, reverse the hood, and measure the lens from mount to hood tip. If the length is 32cm or less and the widest point is 13cm or less, this case is a candidate. Measure the lens as you will store it, not as it sits on the camera.
- Allow clearance at the limit: If your lens measures within 1cm of either limit, expect a snug fit because the foam padding takes up space. Choose this case only if you are comfortable with a close fit.
- Check the hood and collar: Leave the tripod collar on only if the total width stays under 13cm. Do not plan to store the lens with the hood extended; reverse it or remove it. The hood and collar are part of the measurement, not accessories you can ignore.
- Size up for converters or multiple items: If you shoot with a teleconverter attached or want to carry a second small lens, this single-lens case is too small. Choose a larger case or a bag with dividers.
- Use the attachment tab deliberately: The SlipLock tab is for securing the case to a compatible bag, belt, or loop. Confirm your bag or belt has a matching attachment point before you rely on it for hands-free carrying. The case protects the lens; the tab only helps if your bag or belt can accept it.
Product facts
- Lowepro Lens Case 13 x 32cm (Black): Lowepro specifies the case as 13 x 32cm and builds it with thick, one-piece foam padding. The stated dimensions are your fit limit, and the foam is what protects fragile glass and mounts once the lens is inside.
Lowepro Lens Case 13 x 32cm (Black) - Lowepro Lens Case 13 x 32cm (Black): The case has an OverLap Zipper and a SlipLock attachment tab with hook-and-loop fasteners. The zipper keeps dust and moisture out, while the tab lets you attach the case to a compatible bag or belt instead of carrying it by hand.
Who this case fits
Best for
- Photographers carrying a single telephoto lens that measures within 13 x 32cm with the hood reversed
- Shooters who want a padded, dust- and moisture-resistant case for a fragile lens and mount
Not for
- Lenses longer than 32cm with the hood reversed or wider than 13cm at the barrel
- Carrying a lens with a teleconverter attached or storing the lens with the hood extended
