What a Multi Angle Column Solves
Most tripods lock the center column in a single upright position. That works for standard eye-level shots, but it limits your framing when you need a low-angle view, a horizontal camera orientation for panoramic stitching, or a stable setup on uneven ground. A multi angle column adapter replaces the fixed column with one that tilts to almost any angle, including horizontal, vertical, and everything in between.
The Benro GPAC502 Adjustable Multi Angle Column is built for exactly this flexibility. It attaches to your existing tripod center column and lets you reposition the camera without changing legs or buying a new tripod.
Benro GPAC502 Key Details
- Benro GPAC502 Adjustable Multi Angle Column: The GPAC502 is an aluminium centre column adapter that enables the centre column to be moved to almost any angle, including upright vertical, horizontal, down-low vertical, or anything in between. This range of motion lets you shoot from ground level for macro or creative low-angle shots, or orient the camera horizontally for seamless panoramic sequences.

Benro GPAC502 Adjustable Multi Angle Column - Benro GPAC502 Adjustable Multi Angle Column: The central column has a sandbag or ballast slot on one end and a 3/8-16 mount for use with most tripod heads. You can hang weight from the slot to stabilize the setup in wind or on uneven surfaces, and the standard mount works with the heads you already own.
- Benro GPAC502 Adjustable Multi Angle Column: It takes only a few seconds to switch a column from vertical to horizontal. Quick transitions mean you don't miss a shot while fiddling with leg adjustments or swapping equipment.
- Benro GPAC502 Adjustable Multi Angle Column: The GPAC502's integrated fast release plate is fitted with an ARCA style mount that may be utilised with Arca style heads. If you already use Arca-style quick release clamps, this column works with your existing plates and heads without extra adapters.
Low Angle Photography Without a Short Tripod
Getting the camera close to the ground usually means spreading the tripod legs wide or buying a separate low-profile tripod. A multi angle column solves this by tilting the column downward so the camera sits just above the ground while the legs stay at a normal spread. This keeps the tripod stable and avoids the wobble of fully splayed legs.
The GPAC502 supports a down-low vertical position, so you can shoot flowers, insects, or abstract ground-level compositions without kneeling or lying on the ground.
Horizontal and Panoramic Shots
Panoramic photography typically requires a dedicated panoramic head or careful manual rotation. With the GPAC502, you can loosen the panoramic lock knob to rotate the camera 360 degrees while the column stays horizontal or angled. This allows you to capture a series of overlapping frames for stitching later, all from a stable tripod base.
The column also supports a horizontal position, which is useful for copying artwork, shooting flat-lay product photos, or framing a scene where the camera needs to point sideways rather than up or down.
Stability and Balance Considerations
When you tilt the column away from vertical, the center of gravity shifts. The GPAC502 addresses this with a sandbag or ballast slot on the end of the column. Hanging a weight (like a bag or a sandbag) from that slot counteracts the off-center load and keeps the tripod planted. The supplied facts note that ballast can be hung without slipping.
The column also includes a 3/8-16 to 1/4-20 adapter, so you can attach most tripod heads or quick release plates without compatibility issues.
Specifications at a Glance
- Benro GPAC502 Adjustable Multi Angle Column: Product Height: 21.26 in, Product Width: 2.09 in, Product Length: 3.74 in, Weight: 1.07 lb. The compact dimensions mean the column doesn't add excessive bulk to your tripod, and the weight is low enough to carry in a camera bag.
Is a Multi Angle Column Right for You?
If you frequently shoot low-angle subjects, panoramas, or products from above, a multi angle column saves you from buying a second tripod or a specialized head. The Benro GPAC502 gives you those positions in one accessory that swaps in seconds. The trade-off is that you lose the rigid, perfectly vertical column of a dedicated studio tripod when you tilt it, but the ballast slot helps recover stability.
For photographers who rarely change camera height or angle, a standard fixed column is simpler and lighter. But if flexibility matters more than absolute simplicity, this adapter is a practical upgrade.


